black-belt – black-belt – কুইজ মডেল টেস্ট অনুশীলন – 3

black-belt – black-belt – কুইজ মডেল টেস্ট অনুশীলন – 3

1082. How many sections does the balanced scorecard is broken down into

1. 4
2. 3
3. 5
4. 6

1083. Which CTx refers to the delivery related timelines to be met

1. CTD
2. CTS
3. CTT
4. CTP

1084. Which technique reduces the higher-order terms in the model in regression analysis?

1. Dummy variables
2. Transformations
3. Blocking
4. Large samples

1085. Which tool be used by the project team to find all of the potential pitfalls and the actual defects that occur?

1. Design for six sigma
2. Process failure mode and effects analysis
3. Process map
4. Supplier input process output control

1086. In a manufacturing unit there was a study to understand the correlation between the pressure and steel strength to sustain. For which data was collected for 5 different pressure and the data is like –

1. 18450
2. 18687
3. 18550
4. 18550.53

1087. What are the key factors of ANNOVA

1. Estimation of different factors in variation of characteristics under study
2. Relationship difference of averages between two different populations.
3. All of the above
4. Identification of dominating factors

1088. In a manufacturing unit, one particular machine was creating defective pieces due to machine error. The team collectively looked into matter and tried to understand the issue & then it was decided like since the machine is very old so the frequency of preventive maintenance should be increased in order to reduce the defects on products. Next was to replace the machine with the new one. Now even after increasing the preventive maintenance defects remained the same and with replacing machine the defects came under control.

1. Alternate & Null
2. Null & Alternate
3. Alternate & Alternate
4. Null & Null

1089. In regression analysis, which of the following techniques can be used to reduce the higher-order terms in the model?

1. Transformations
2. Blocking
3. Large samples
4. Dummy variables

1090. When should non-parametric statistical method be used?

1. the measurement scale is either nominal or ordinal
2. knowledge of the underlying distribution of the population is limited
3. the statistical estimation is required to have higher assurance
4. management requires substantial statistical analysis prior to implementing

1091. What is the RPN number in FMEA with ratings for low-heat temperature failure mode being severity = 9, occurrence = 2 and detection = 1?

1. 4
2. 6
3. 12
4. 18

আমাদের কাছে থাকা লক্ষ লক্ষ মডেল টেস্ট থেকে প্রাকটিজের জন্য কিছু এখানে তুলে ধরা হল। প্রতিটি অধ্যায়ের উপরে ইশিখন.কম কুইজ চ্যালেঞ্জ এ আছে শত শত মডেল টেস্ট বার বার মডেল টেস্ট দিয়ে নিজেকে যাচাই কর এবং পুরো বাংলাদেশের সকল শিক্ষার্থীর সাথে আপনার মেধা তালিকা দেখুন। প্রশ্নে কোন প্রকার ভুল থাকলে সঠিক উত্তরসহ নিচে কমেন্ট করে জানাবেন, আমরা ঠিক করে দেবো।