router – web-dev-net-platform – কুইজ মডেল টেস্ট অনুশীলন – 37

router – web-dev-net-platform – কুইজ মডেল টেস্ট অনুশীলন – 37

12678. If configuring a Cisco router to connect to a non-Cisco router across a Frame Relay network, which encapsulation type would you select?

1. CISCO
2. ISDN
3. Q933a
4. IETF

12679. Identify the administrative distance and appropriate routing protocol.

1. RIP = 255 IGRP = 100 RIP = 120 IGRP = 100 RIP = 1 IGRP = 0RIP = 100

12680. Identify the default serial encapsulation.

1. SDLC
2. Frame Relay
3. HDLC
4. ISDN

12681. What is the types of access list that can be configured on a Cisco router?

1. Standard
2. Complex
3. Packet
4. Filtering

12682. You are a system administrator and you want to deny access to a group of computers with addresses 1.30.16.0 to 1.30.31.0. Which wildcard mask would you use?

1. 0.0.255.255
2. 0.0.31.255
3. 0.0.15.255
4. 0.0.127.255

12683. Which form of PPP error detection on Cisco routers monitors data dropped on a link?

1. Quality
2. Droplink
3. Error Monitor
4. Magic Number

12684. Identify the order of the 5 step encapsulation. 1. Create the segment 2. Convert the frame to bits 3. Create the packet 4. Create the frame 5. User creates the data

1. 1
2. 2
3. 4
4. 2

12685. As the system administrator, you enter the following commands at the command prompt: ipx routing access-list 800 permit 2b 4d int e0 ipx network 4d ipx access-group 800 out int e1 ipx network 2b int e2 ipx network 3c What did these command accomplish?

1. Traffic from network 4c destined for network 4d will be forwarded out Ethernet0.
2. Traffic from network 3c destined for network 4d will be forwarded out Ethernet0.
3. Traffic from network 2b destined for network 4d will be forwarded out Ethernet0.
4. Traffic from network 4d destined for network 2d will be forwarded out Ethernet0.

12686. What does the command "IP name-server 255.255.255.255" accomplish?

1. It disables domain name lookup.
2. It sets the domain name lookup to be a local broadcast.
3. This is an illegal command.
4. The command is now defunct and has been replaced by "IP server-name ip any"

12687. What do the following commands accomplish? access-list 1 permit 172.16.0.0 0.0.255.255 interface ethernet 0 IP access-group 1 out interface ethernet 1 IP access-group 1 out

1. All traffic is allowed.
2. All traffic is blocked.
3. This will block traffic from subnet 172.16.4.0 and allow all other traffic.
4. This will allow traffic from subnet 172.16.4.0 and block all other traffic.

আমাদের কাছে থাকা লক্ষ লক্ষ মডেল টেস্ট থেকে প্রাকটিজের জন্য কিছু এখানে তুলে ধরা হল। প্রতিটি অধ্যায়ের উপরে ইশিখন.কম কুইজ চ্যালেঞ্জ এ আছে শত শত মডেল টেস্ট বার বার মডেল টেস্ট দিয়ে নিজেকে যাচাই কর এবং পুরো বাংলাদেশের সকল শিক্ষার্থীর সাথে আপনার মেধা তালিকা দেখুন। প্রশ্নে কোন প্রকার ভুল থাকলে সঠিক উত্তরসহ নিচে কমেন্ট করে জানাবেন, আমরা ঠিক করে দেবো।