অণুজীব

maintenance – business-analysis – কুইজ মডেল টেস্ট অনুশীলন – 10

1381. Which is the most effective method to minimize accidents due to human error?

  1. Put Warning Signs At The Most Visible Locations.
  2. Put Automatic Preventive Features Into The Products.
  3. Provide Easy Access To Equipment.
  4. Provide Clear User Instructions To Customers.

1382. What is not an advantage of failure terminated test plans

  1. Either maximum test time or maximum number of failures are fixed prior to testing
  2. The maximum accumulated test time is shorter than for a truncated sequential test based on the same parameters
  3. the number of failures and the accumulated test time will exceed those of a similar truncated sequential test
  4. better absolute measure of the Reliability characteristic is obtained in most cases

1383. Which form does RAP principle want to keep intact, as

  1. semi-finished
  2. finished
  3. raw material
  4. modular

1384. What can be concluded about a repairable product, having failure rate of 0.00028 failures/hour?

  1. Mttf Is About 3600 HoursMttf Is About 28
  2. 000 HoursNone of the above
  3. The Product Is In The Burn-In Phase

1385. What is the critical reason for usage of reliability prediction

  1. Provide necessary input to unit and system-level life cycle cost analyses
  2. Provide necessary input to system-level reliability models
  3. Assess the effect of product reliability on the maintenance activity and on the quantity of spare units required for acceptable field performance of any particular system
  4. All of the above

1386. Which maintenance strategy is a condition-based approach to asset management

  1. Scheduled
  2. Breakdown
  3. PdM
  4. None of the above

1387. What does the symbols S, O and D stand for in RPN calculation under FMEA?

  1. Severity
  2. Occurrence
  3. DevelopmentSensitivity
  4. Occurrence

1388. Which quality cost does downtime is classified under

  1. External failure
  2. Internal failure
  3. Prevention
  4. Appraisal

1389. Which term refers to whether an estimator tends to either over or underestimate the parameter

  1. Sampling variability
  2. Bias
  3. Point estimate
  4. Mean

1390. Which of the following is an human error

  1. misidentification
  2. inexperience
  3. misunderstanding
  4. All of the above

আমাদের কাছে থাকা লক্ষ লক্ষ মডেল টেস্ট থেকে প্রাকটিজের জন্য কিছু এখানে তুলে ধরা হল। প্রতিটি অধ্যায়ের উপরে ইশিখন.কম কুইজ চ্যালেঞ্জ এ আছে শত শত মডেল টেস্ট বার বার মডেল টেস্ট দিয়ে নিজেকে যাচাই কর এবং পুরো বাংলাদেশের সকল শিক্ষার্থীর সাথে আপনার মেধা তালিকা দেখুন। প্রশ্নে কোন প্রকার ভুল থাকলে সঠিক উত্তরসহ নিচে কমেন্ট করে জানাবেন, আমরা ঠিক করে দেবো।

Leave a Reply

স্যার, কিভাবে আপনাকে সাহায্য করতে পারি?

Click one of our representatives below

Customer Support
Customer Support

Syeda Nusrat

I am online

I am offline

Technical Support
Technical Support

Ariful Islam Aquib

I am online

I am offline