router – web-dev-net-platform – কুইজ মডেল টেস্ট অনুশীলন – 7

61. You want to enable both arpa and snap encapsulation on one router interface. How do you do this?

1. Both arpa and snap are enabled by default so you don’t have to configure anything.
2. Enable Novell-ether to run multiple encapsulation types.
3. The interface can handle multiple encapsulation types with no extra configuration.Assign two network numbers
4. one for each encapsulation type.”;}}

62. You are logged into a router, what command would show you the IP addresses of routers connected to you?

1. show cdp
2. show cdp neighbors detail
3. show neighbors
4. show run

63. What must be true for two Routers running IGRP to communicate their routes?

1. Same autonomous system number
2. Use composite metric
3. Connected using Ethernet only
4. Configured for PPP

64. You receive "input filter list is 800 and output filter list is 801" as part of the output from a show interfaces command. What kind of traffic are you filtering?

1. DDR
2. IPX/SPX
3. LocalTalk
4. TCP/IP

65. Which of the following is not the function of the AAL

1. Handling of cell delay variation.
2. Segmentation and reassembly of user information.
3. Cell header generation.
4. Handling of lost and misinserted cell.

66. How many access lists are allowed per interface?

1. Router interface +1 per port.One per port
2. per protocolUnlimitedTwo per port
3. per protocol”;}}

67. You are given the following address: 15.16.193.6/21. Determine the subnet mask, address class, subnet address and broadcast address.

1. 255.255.242.0
2. 15.16.192.0
3. 15.16.199.255
4. 255.255.248.0

68. What do the following commands accomplish? – access-list 1 permit 172.16.0.0 0.0.255.255 – interface ethernet 0 – IP access-group 1 out – interface ethernet 1 – IP access-group 1 out

1. Only traffic from the source network 172.16.0.0 will be forwarded. Non- 172.16.0.0 network traffic is blocked.
2. Only traffic from the source network 172.16.0.0 will be blocked.
3. All traffic will be forwarded.
4. Non-172.16.0.0 traffic will be forwarded.

69. As a system administrator, you need to provide your routers with a Domain Name System (DNS) server. How many DNS servers can you specify with one command?

1. 2
2. 4
3. 1
4. 6

70. Routers can learn about destinations through static routes, default, or dynamic routing. By default, a router will use information derived from __________.

1. IGRP
2. RIP
3. IP
4. TCP

আমাদের কাছে থাকা লক্ষ লক্ষ মডেল টেস্ট থেকে প্রাকটিজের জন্য কিছু এখানে তুলে ধরা হল। প্রতিটি অধ্যায়ের উপরে ইশিখন.কম কুইজ চ্যালেঞ্জ এ আছে শত শত মডেল টেস্ট বার বার মডেল টেস্ট দিয়ে নিজেকে যাচাই কর এবং পুরো বাংলাদেশের সকল শিক্ষার্থীর সাথে আপনার মেধা তালিকা দেখুন। প্রশ্নে কোন প্রকার ভুল থাকলে সঠিক উত্তরসহ নিচে কমেন্ট করে জানাবেন, আমরা ঠিক করে দেবো।