router – web-dev-net-platform – কুইজ মডেল টেস্ট অনুশীলন – 38

router – web-dev-net-platform – কুইজ মডেল টেস্ট অনুশীলন – 38

12688. Identify the purpose of ICMP.

1. Transporting routing updates
2. Send error and control messages
3. Collision detection
4. Avoiding routing loops

12689. Which protocol allows the administrator to assign a cost for passing through a network based on the type of service required

1. RIP
2. BGP
3. OSPF
4. CBT

12690. Which delimiter is used for component selection

1. ,
2. :
3. .
4. %

12691. You are given the IP address of 172.16.2.160 with a subnet mask of 255.255.0.0. What is the network address in binary?

1. 10101100 00000000
2. 00000010 10100000
3. 11100000 11110000
4. 10101100 00010000

12692. When using access lists, it is important where those access lists are placed. Which statement best describes access list placement?

1. Put access lists as close to corporate headquarters as possible.
2. Put extended access lists as near the destination as possible. Put standard access lists as close to the source as possible.
3. Put standard access lists as near the destination as possible. Put extended access lists as close to the source as possible.
4. It isn’t import where access lists are placed since the router will read and cache the whole list.

12693. You have an IP host address of 201.222.5.121 and a subnet mask of 255.255.255.248. What is the broadcast address?

1. 201.222.5.121
2. 201.222.5.127
3. 201.222.5.120
4. 201.222.5.122

12694. Which of the following would STP choose to become the root bridge in the selection process

1. 32769: 22-33-44-55-66-78
2. 32768: 22-33-44-55-66-77
3. 32769:11-22-33-44-55-65
4. 32768: 11-22-33-44-55-66

12695. Which process does TCP, but not UDP, use?

1. Source Port
2. Windowing
3. Destination Port
4. Destination and source port

12696. Select the correct statement about PPP and SLIP for WAN communications from the following.

1. SLIP uses its Network Control Programs (NCPs) component to encapsulate multiple protocols.
2. None of the above
3. PPP can only transport TCP/IP
4. PPP uses its Network Control Programs (NCPs) component to encapsulate multiple protocols.

12697. Identify the switching method that receives the entire frame then dispatches it.

1. Store and forward
2. Receive and forward
3. Fast forward
4. Cut-through

আমাদের কাছে থাকা লক্ষ লক্ষ মডেল টেস্ট থেকে প্রাকটিজের জন্য কিছু এখানে তুলে ধরা হল। প্রতিটি অধ্যায়ের উপরে ইশিখন.কম কুইজ চ্যালেঞ্জ এ আছে শত শত মডেল টেস্ট বার বার মডেল টেস্ট দিয়ে নিজেকে যাচাই কর এবং পুরো বাংলাদেশের সকল শিক্ষার্থীর সাথে আপনার মেধা তালিকা দেখুন। প্রশ্নে কোন প্রকার ভুল থাকলে সঠিক উত্তরসহ নিচে কমেন্ট করে জানাবেন, আমরা ঠিক করে দেবো।