router-support – web-dev-net-platform – কুইজ মডেল টেস্ট অনুশীলন – 44

router-support – web-dev-net-platform – কুইজ মডেল টেস্ট অনুশীলন – 44

12748. Which router console commands shown below are used to manage telnet sessions to other routers?

1. D# kill connection 1
2. D# exit session 2
3. D# disconnect 3
4. None of the above

12749. Which of the following commands displays the configurable parameters and statistics of all interfaces on a router?

1. show versions
2. show processes
3. show running-config
4. show interfaces

12750. Which action will allow telnet traffic from a user’s PC to a router using TCP/IP?

1. Connect the PC’s COM port to the router’s console port using a crossover cable
2. Connect the PC’s COM port to the router’s console port using a straight-through cable
3. Connect the PC’s COM port to the router’s Ethernet port using a straight-through cable
4. Connect the PC’s Ethernet port to the router’s Ethernet port using a crossover cable

12751. Static routing needs to be configured on router PC1 . In which situation would the use of a static route be appropriate?

1. To configure a route from an ISP router into a corporate network
2. To reach a network is more than 15 hops away.
3. To configure a route to the first Layer 3 device on the network segment.
4. To configure a route when the administrative distance of the current routing protocol is too low.

12752. You have a network that supports VLSM and you need to reduce IP address waste in your point to point WAN links. Which of the masks below would you use?

1. /38
2. /27
3. /30
4. /23

12753. Which of the commands below can you use to configure a default route on router PC1 ?

1. PC1 (config)# ip route 0.0.0.0 255.255.255.255 S0
2. None of the above
3. PC1 (config)# ip route 0.0.0.0 0.0.0.0 E0
4. PC1 (config-interface)# ip route 255.255.255.255 0.0.0.0 192.168.1.21

12754. You need to configure a new Cisco router for remote access on the network. How many simultaneous telnet sessions does this Cisco router support by default?

1. 2
2. 5
3. 4
4. 1

12755. Which of the following commands would you use to configure a default route to any destination NOT found in the routing table of router PC1 ?

1. PC1 (config)# ip default-route 0.0.0.0 255.255.255.255 s0
2. PC1 (config)# ip route 0.0.0.0 0.0.0.0 s0
3. PC1 (config)# ip default-route 0.0.0.0 0.0.0.0 s0
4. PC1 (config)# ip route 0.0.0.0 255.255.255.255 s0

12756. Router PC1 has just received a packet and needs to route it. What action must this router take in order to route incoming packets?

1. None of the above
2. Validate sources of routing information.
3. Inspect the routing table to select the best path to the destination network addresses.
4. Inspect the ARP table to verify a legitimate source MAC address for each packet.

12757. You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into router PC1 locally using a terminal emulation program such as HyperTerminal.

1. Connect the PC’s Ethernet port to the router’s Ethernet port using a rollover cable
2. Connect the PC’s COM port to the router’s Ethernet port using a straight-through cable
3. Connect the PC’s COM port to the router’s console port using a rollover cable
4. Connect the PC’s COM port to the router’s console port using a straight-through cable

আমাদের কাছে থাকা লক্ষ লক্ষ মডেল টেস্ট থেকে প্রাকটিজের জন্য কিছু এখানে তুলে ধরা হল। প্রতিটি অধ্যায়ের উপরে ইশিখন.কম কুইজ চ্যালেঞ্জ এ আছে শত শত মডেল টেস্ট বার বার মডেল টেস্ট দিয়ে নিজেকে যাচাই কর এবং পুরো বাংলাদেশের সকল শিক্ষার্থীর সাথে আপনার মেধা তালিকা দেখুন। প্রশ্নে কোন প্রকার ভুল থাকলে সঠিক উত্তরসহ নিচে কমেন্ট করে জানাবেন, আমরা ঠিক করে দেবো।