network – web-dev-net-platform – কুইজ মডেল টেস্ট অনুশীলন – 7

61. What is the IEEE standard associated with Gigabit Ethernet?

1. 802.11
2. 802.5
3. 802.3ab
4. 802.3ae

62. Static routing needs to be configured on router PC1 . In which situation would the use of a static route be appropriate?

1. To configure a route from an ISP router into a corporate network
2. To reach a network is more than 15 hops away.
3. To configure a route to the first Layer 3 device on the network segment.
4. To configure a route when the administrative distance of the current routing protocol is too low.

63. Binary trees nodes with no successors are called…?

1. End nodes
2. Terminal nodes
3. Final nodes
4. Last nodes

64. CDP is running between two devices. What information is supplied by CDP?

1. Device Identifiers
2. Software Testing Capabilities list
3. Software Platform
4. Route identifier

65. You need to configure NAT on a router that is connected to the Internet. To do so, you must determine what the Inside Global IP addresses will be. What does the "Inside Global" address represent in the configuration of NAT?

1. The summarized address for all of the internal submitted addresses
2. A registered address that represents that represents an inside host to an outside networkA globally unique
3. private IP address assigned to a host on the inside networkThe MAC address of the router used by inside hosts to connect to the Internet

66. FDDI stands for…

1. Fiber Data Distributed Interface
2. Fiber Distributed Data Interface
3. Fiber Dual Distributed Interface

67. A context diagram is used…

1. In systems analysis of very complex systems
2. As an aid to programmer
3. As the first step in developing a detailed DFD of a system
4. As an aid to system design

68. What is the purpose of using the copy flash tftp command on a router?

1. To move the IOS image from a server to the router
2. To create a backup copy of the IOS
3. To copy an IOS image to the router
4. To backup the router configuration to a server

69. You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into router PC1 locally using a terminal emulation program such as HyperTerminal.

1. Connect the PC’s Ethernet port to the router’s Ethernet port using a rollover cable
2. Connect the PC’s COM port to the router’s console port using a rollover cable
3. Connect the PC’s COM port to the router’s Ethernet port using a straight-through cable
4. Connect the PC’s COM port to the router’s console port using a straight-through cable

70. Although TCP segments are similar to UDP segments, TCP packets contains some additional fields. Which of the following are found in a TCP header, but not in a UDP header?

1. Destination port
2. None of the above
3. Sequence number
4. Checksum

আমাদের কাছে থাকা লক্ষ লক্ষ মডেল টেস্ট থেকে প্রাকটিজের জন্য কিছু এখানে তুলে ধরা হল। প্রতিটি অধ্যায়ের উপরে ইশিখন.কম কুইজ চ্যালেঞ্জ এ আছে শত শত মডেল টেস্ট বার বার মডেল টেস্ট দিয়ে নিজেকে যাচাই কর এবং পুরো বাংলাদেশের সকল শিক্ষার্থীর সাথে আপনার মেধা তালিকা দেখুন। প্রশ্নে কোন প্রকার ভুল থাকলে সঠিক উত্তরসহ নিচে কমেন্ট করে জানাবেন, আমরা ঠিক করে দেবো।